2018 Exmark LAZER Z X-SERIES LZX801GKA60600
LAZER Z X-SERIES
What you get when you check all the boxes.And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
Features may include:
PATENTED RED TECHNOLOGYEnabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
ULTRACUT SERIES 6 DECKThis full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
A NEW LEVEL OF COMFORTComfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
PRODUCTIVITYHigher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
REAR DISCHARGE DECKAvailable in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
TOOL-LESS BELT REMOVALDeck and hydro belt can be installed without using any tools.
- 2018
- Exmark
- LAZER Z X-SERIES
- LZX801GKA60600
- Zero-Turn Mower
- Model: FX801V | Series: V-Twin
- Kawasaki®
- 3,750 RPM | Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
- Heavy-duty canister air filtration system
- Carbureted
- 852
- Gas Carbureted | Indicator: Yes - electronic Sender
- Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
- Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Lever-actuated disc brake.
- 12-volt battery with 15-amp alternator.
- .50" thick caster yoke arms.
- Caster: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
- Drive: 24 x 12.0-12, 4-ply Turf Master®
- Deck: 60"
- 70 in. (177.8 cm) | Cutting:1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- 72.8 in. (184.9 cm)
- 83.1 in. (211.1 cm)
- 12-gallon (45.4-L), single tank with single fill location.
- 1215
- Cup Holder: Standard | Drive: Hydro-Drive | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- 3 Blades at 20.50" Length | Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver. | Blade Tip Speed: Approximately 18,500 fpm.
- Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- $7,800.00
- $6,499.00
- Beavercreek, Ohio
- Pre-Owned
- U402370782
- 2018
- Exmark
- LAZER Z X-SERIES LZX801GKA60600
- U402370782
- RED
- KAWASAKI
- 1200.7
- Gas
- Available
- 72.8 in. (184.9 cm)
- 70 in. (177.8 cm) | Cutting:1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.