Selling Price -$3,499.00
2018 Exmark LAZER Z E-SERIES LZE740EKC60400
LAZER Z E-SERIES
The definition of value.The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn mower, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.
Features may include:
HYDRO DRIVE, SIMPLIFIEDOur hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
UNIBODY FRAMEOur one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
LESS TIME AT THE PUMPGas-powered E-Series models have a single 8-gallon tank with one fill location.
ON-BOARD DIAGNOSTICSCheck vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
FEWER GREASE POINTSWith just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
ULTRACUT SERIES 4 DECKThis full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
REAR DISCHARGE DECKAvailable in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
TOOL-LESS BELT REMOVALDeck and hydro belt can be installed without using any tools.
- 2018
- Exmark
- LAZER Z E-SERIES
- LZE740EKC60400
- Zero-Turn Mower
- Model: ECV740 | Series: Command™ EFI
- Kohler®
- 3,750 RPM | Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Heavy-duty canister air filtration system
- Electronic Fuel Injected
- 747
- Gas EFI | Indicator: Yes - electronic Sender
- Engagement: MagStop Electromagnetic 175 ft-lb clutch with spot brake
- Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Lever-actuated disc brake.
- 12-volt battery with 20-amp alternator.
- .50" thick caster yoke arms.
- Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
- Drive: 24 x 12-12, 4 ply Super Turf®
- Deck: 60"
- 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- 72.8 in. (184.9 cm)
- 83.1 in. (211.1 cm)
- 8-gallon (30.3-L) single tank with single fill location.
- 1115
- Cup Holder: Standard | Drive: Hydro-Drive | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | ROPS: 2-post foldable ROPS standard with seat belt and latch.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- 3 Blades at 20.50" Length | Blade Spindles:No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. | Blade Tip Speed: Approximately 18,500 fpm.
- Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
- $6,299.00
- $3,499.00
- Beavercreek, Ohio
- Pre-Owned
- U402849959
- 2018
- Exmark
- LAZER Z E-SERIES LZE740EKC60400
- 402849959
- Model: ECV740 | Series: Command™ EFI
- 1827
- Gas
- Available
- 72.8 in. (184.9 cm)
- 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.