Discharge type Rear Blade spindle speed 3362 rpm
Cutting width 14'-0" (4.52 m) Blade tips speed 18396 fpm (5607 mpm)
Overall width 14'-3" (4.34 m) Blade drive belt 1 B-section
Transport height 7'-7 1/2" (2.32m) Drive belt tension 1 1/4" (3.2 cm)
Transport width 7' - 11" (2.41m) Blade bearing Sealed Ball Bearings
Overall length 14'-10" (4.52 m)Mowing position
12'-11" (3.94 m)Transport position Blade overlap Spring loaded idler with over-center
release
Weight W/15" tires = 3,000 lbs.
W/18" tires = 3,150 lbs.
Blades
3 each per deck
Low lift (5/16" x 2 1/2" x 20 29/32")
Optional blades:
Medium lift, high Lift & mulching
Tractor horsepower Minimum 40 hp (30 kW)
Maximum 70 hp (52 kW) Cutting height 3/4" to 5 1/4" (In 1/4" increments)
2 cm to 13 cm (in 6 mm increments)
Hitch Pull type with adjustable clevis and
safety tow chain Deck tires 10 Each, air tires with sealant
18 x 9.5 or 15 x 6.6
Tongue support 2,200 lb (1000 kg) capacity screw jack Deck wheel spindles 1 1/4" (3.2 cm) With nylon bushings
Gearbox support 3/8" Steel channel Transport tires 2 each, 23 x 10.5 with sealant
Gearboxes 540 rpm (1)-splitter & (3)-wing Transport locks Automatic with pull rope release
Gearbox lubrication Gear lube 80-90W EP Turning radius Zero turning radius
Gearbox oil capacity
3 - Wings: 3.5 pints (1.7 L)
SD splitter: 2.125 pints (1.0 L) or
OMNI splitter: 2.5 pints (1.2 L)
Mowing capacity
@mph= Acres/hour
@km/hr= Hectares/hr
@ 2 mph = 3.4 @3 km/h = 1.3
@ 4 mph = 6.8 @6 km/h = 2.5
@ 6 mph = 10.2 @10 km/h = 4.3
Anti-scalp roller Front center and
outside deck corners Wing deck flex 23 Degrees left to right
22 Degrees front to back
Main driveline (1) Cat. lV constant velocity
with slip clutch Center deck flex 10 Degrees left to right
22 Degrees front to back
Deck drivelines (3) Cat. II Hydraulic outlets 1 Set required
Deck size & quantity 3 each / 60" (1.52 m) Deck cylinders Dual acting
Deck overlap 6" (15 cm) Gauge wheel arms 1/4" (6 mm) Wall square tubing
Deck thickness 3/16" (5 mm) Signal lights
7 Pin connector
LED (light-e
MoreLess
Limited Time Offer!
Selling Price -$29,119.00
2022 Land Pride AFM4214 All-Flex Mowers AFM4214
The Land Pride AFM4214 All Flex Grooming Mower provides users with an excellent cut quality on groomed areas such as sports fields, theme parks, fairways, turf farms, and large estates. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius thanks to the sleek frame design. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.
Features may include:
GEARBOX WARRANTY- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- 23" Large transport tires offer smooth roading and less grass compaction.
- Sleek frame design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
- Over center release easily takes tension off the drive belts during extended off time, or for belt replacement.
- Low deck pivot allows for greater side to side flotation on the wing decks.
- Anti-scalp rollers on nose and trailing edges of decks protect the deck as well as the turf.
- 2022
- Land Pride
- AFM4214 All-Flex Mowers
- AFM4214
- Rotary Mowers
- 40-70 HP
- 540 RPM B-section V Belt
- Input: Cat. 4 CV w/Slip Clutch | Deck: Cat. 3
- 540 RPM, 3 Wing, 1 Splitter
- Deck Tires - 10 total: 15 x 6.6 Air Tire, Sealant or 18 x 9.5 Air Tire, Sealant | Transport Tires and Bearing: 23 x 10.5, Sealant Tapered Bearings
- Deck Wheel Spindles: 1 1/4" With Nylon Bushings
- Mowing Capacity: @ 2 MPH = 3.39 Acres/hr / @ 4 MPH = 6.78 Acres/hr / @ 6 MPH = 10.17 Acres/hr
- Blade Spindles: 1-3/8" Stressproof® Shaft / 3,362 RPM | Blade Tip: 18,396 FPM
- 3/16"
- Pull-Type, Adjustable Clevis & Safety Tow Chain
- Deck Overlap: 6" | Decks: 3 each: 60" | Blade Overlap: 1-1/4" | Flex - Wings: 23° L-R / 22° F-B | Flex - Center: 10° L-R / 22° F-B | Wing Cylinders: 2-1/2" x 12" | Rear Deck Cylinder: 2-1/2" x 8"
- Cutting: 3/4" - 5-1/4" in 1/4" Incr.
- 14'- 3"
- 7'11'
- Blade Size: 5/16" x 2-1/2" x 20-29/32"
- 14' (427 cm)
- Positive Tongue: 540 lb | 3,000 lbs. (1,361 kg)
- Anti-Scalp Roller: Front Center and Outside Deck Corners | Blade Bearings: Greaseable Ball Bearings | Deck Spindle Housing: Cast Iron Greaseable Hubs
- Rear
- $29,119.00
- Beavercreek, Ohio
- New
- L1681019
- 2022
- Land Pride
- AFM4214 All-Flex Mowers AFM4214
- 1681019
- Available
- Cutting: 3/4" - 5-1/4" in 1/4" Incr.